OTHER

ADVANCED FEATURES

Polling Transmission

Use Polling Transmission when you wish to leave a document in the memory for others to pick up.

You cannot specify the telephone number of the polling terminal (the terminal that you wish to poll your document), but using the ID Code there are ways to make sure that the message does not go to the wrong place, as explained below.

There are three types of Polling Transmission.

Free Polling: Anybody can poll the message from the polled machine’s memory.

Secured Polling: The message will only be sent out if the ID Code of the polling machine is the same as the ID Code stored in the polled machine.

Stored ID Override: There are two ways to use this feature:

If your ID Code is different from that of the other terminal, you can use the other terminal’s ID Code just for this transmission (ask the other terminal’s operator what their ID Code is). Your machine’s stored ID Code will be ignored.

For extra security, both parties can specify an ID Code just for this communication. The ID Codes of both machines will be ignored. All communicating parties need to coordinate their ID Codes in this case.

Only one document can be stored in the memory for Free Polling, and only one can be stored for Secured Polling. However, with Stored ID Override, you can store more than one file, but you must use a different ID for each file.

Secured Polling and Stored ID Override can only be used between terminals produced by the same manufacturer.

Cross-reference

ID Code: see page 85.

Free Polling

1.Place your document in the feeder.

If you only wish to scan a part of the document, use the Specified Image Area feature. See page 118 for details.

2.

3.

Function 1 4

See page 157 for the options that are available with Polling Transmission.

Start

FREE POLLING

OPTIONS

 

 

 

 

PRESS

 

 

 

 

START

 

 

 

 

 

 

 

 

Your fax message is stored and held on polling standby.

154

Page 168
Image 168
Ricoh FAX5600L manual 154, Polling Transmission