ROUTINE OPERATION

SENDING A FAX MESSAGE

2. Press

until "TTI ON OFF"is displayed.

If you wish to change the TTI setting, press setting is correct.

or

until the displayed

3.

Yes

when you have finished.

ID Transmission

You must have stored an ID Code before you can use this feature; see page 85.

If you switch ID Transmission on, transmission will only take place if the other terminal’s ID Code is the same as yours. This feature can stop you from accidentally sending information to the wrong place, if you co-ordinate ID Codes with the other party.

This feature works in the same way as Closed Network. To enable Closed Network, you must have it switched on by a service technician; it then stays on for all communications until you have it switched off. However, you can use ID Transmission for whichever transmissions you like. For receptions, ID Transmission does not work; you will have to use Closed Network if you wish to use this type of feature for your received fax messages.

ID Transmission may not be reliable when communicating with terminals produced by another maker.

ROUTINE

OPERATION

 

 

Cross-reference

 

ID Code: see page 85.

Closed Network: see page 121.

1. Press

0 7

OPTION SELECT

AUTO REDUCE

YES

ON

TO END

OFF

TTI

2. Press until "ID TRANSMIT ON OFF"is displayed.

If you wish to change the ID TRANSMIT setting, press or displayed setting is correct.

until the

65

Page 79
Image 79
Ricoh FAX5600L manual ID Transmission