ADVANCED FEATURES

NETWORKING

Example Procedure (for Quick Reference)

Remote ID: 1111

Transfer Result Report Destination: Speed Dial 04 in your machine.

End Receivers, as programmed in your machine: Quick Dial 01, Speed Dial 02, Group Dial 03.

1.The requesting party must dial your machine using an external telephone, and wait for the fax tones.

2.When the fax tones come in, the requesting party must immediately input the following sequence. (ACK: Wait for the ACK tone)

#

- 1111# - 24# - *** - *04# - 01# - *02# - **03# - ## -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ACK

ACK

ACK

ACK

 

ACK

ACK

ACK

 

ACK ACK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

x3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

End Receiver:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Your Machine’s

 

 

Transfer Result

 

 

Speed Dial 02

 

 

 

 

 

 

 

 

End Receiver:

Remote ID Code

 

 

Report Destination:

 

 

 

 

 

 

 

 

 

 

Speed Dial 04

 

 

 

 

 

 

Group Dial 03

 

 

 

 

 

 

 

 

 

 

 

 

End Receiver:

Quick Dial 01

3. When the requesting party hears fax tones again, they must press Start.

Notes

The remote ID code must have been programmed earlier.

After entering the ID code, if there is an interval of more than 5 seconds followed by three short beeps repeated three times, enter the remote ID again.

If you enter the wrong remote ID, you will hear three short beeps. Try to enter the code again. If you enter the wrong code five times, the remote control services will not be available until you go back to the machine and reprogram the ID (this is a security measure to prevent other people getting access to your machine).

ADVANCED

FEATURES

 

 

97

Page 111
Image 111
Ricoh FAX5600L manual Example Procedure for Quick Reference