Ricoh FAX5600L manual 129, Memory Lock Memory Card or Hard Disk Required, Storing a Memory Lock ID

ADVANCED FEATURES RECEPTION

Memory Lock (Memory Card or Hard Disk Required)

Overview

To use Memory Lock, you must first:

❐Store a Memory Lock ID.

❐Switch Memory Lock on.

If Memory Lock is switched on, the machine will not print any incoming fax messages. They will be kept in memory until you enter the Memory Lock ID that you previously stored in the machine. Messages received by Confidential Reception will not be printed when you input the Memory Lock ID.

Cross-reference Confidential Reception: see page 126.

Storing a Memory Lock ID

This can be any four-digit code (using digits 0 to 9 and letters A to F), except 0000 and FFFF.

ADVANCED FEATURES

1.Function 6 0 2 2 2 2

6 1 then ↓ until the screen is as shown opposite.

❐If no memory card or hard disk is installed, you will not see this prompt.

2.Yes

3.Input the Memory Lock ID that you will

be using. Example: 6 7 5 4

❐You must input this ID when you wish to print an incoming message that was stored under the protection of the Memory Lock feature.

4.Store the ID: Yes Function

MEMORY LOCK ID
	YES	TO SET	PREVIOUS
	NO	TO CANCEL	NEXT
MEMORY LOCK ID

	ID SETTING
	_					TO END
					YES
MEMORY LOCK ID
		OR		. NO
	YES		CLR
	6754

129