BEFORE USING THE MACHINE

Make sure an original does not remain on the document glass.

Open the automatic document feeder, make sure that an original is not on the document glass, and then gently close the automatic document feeder.

1

When closing the automatic document feeder, take care that your fingers do not become pinched.

Adjust the original guides to the size of the originals.

2

Indicator line

3

Place the originals.

Make sure the edges of the originals are even.

Insert the originals face up all the way into the document feeder tray.

Insert a number of originals that does not exceed the indicator line on the document feeder tray.

Up to 50 sheets can be inserted.

Be sure to remove originals that have been finished scanning from the original exit tray.

• Do not insert your hand into the document insertion opening in the automatic document feeder.

• If originals are placed higher than the line, misfeeds may occur.

•Before inserting originals into the document feeder tray, be sure to remove any staples or paper clips.

•If originals have damp spots due to correction fluid, ink or pasteup glue, wait until the originals are dry before making copies. Otherwise the interior of the document feeder or the document glass may be soiled.

•When using originals with two or three holes, place them so that

the punched edge is at a position away from the feed slot of the document feeder tray.

Hole

positions

Feed slot

1-35

Contents