Sharp MX-C311, MX-C401 bypass tray, Place the original, Select the special modes, Place the transparency film in the

COPIER

ADDING INSERTS WHEN COPYING ON TRANSPARENCY FILM (Transparency Inserts)

When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle.

It is also possible to copy on the inserts.

	B
	Inserts
	Place the transparency film in the
	bypass tray.
	• Transparency film can only be placed in the bypass tray.
1	• Place the transparency film face down on the bypass tray.
	When placing transparency film, place so that the rounded
	corner of the film is to the front and left.
	• After loading the transparency film, configure the bypass tray
	settings as explained in "MAKING COPIES USING THE
	BYPASS TRAY" (page 2-37).
	Place the original.
2	Place the original face up in the document feeder tray, or face down on the document glass.
	After placing the original, specify the original size.

☞ORIGINAL SIZES (page 2-29)

Select the special modes.

3	(1)	Touch the [Special Modes] key.
	(2)	Touch the [Transparency Inserts] key.

☞ Special modes menu (1st screen) (page 2-40)

2-51

Contents