Sharp MX-C311, MX-C401 Touch the [OK] key, Enter the scan size (original size)

SCANNER/INTERNET FAX

		(1), (2)				(3)
Scan/Original						OK
Size Input					Cancel	OK
	X		11	inch
				(1 14)
	Y		8½	inch	1/2)
				(1 8

Enter the scan size (original size).

(1)Enter the X (horizontal) dimension of the original.

With the [X] key highlighted, enter the X (horizontal)

dimension of the original with the keys. When the document glass is used, enter a number from 1" to 11-5/8" (25 mm to 297 mm).

When the automatic document feeder is used, enter a number from 3-1/2" to 14" (89 mm to 356 mm).

When a number which is from 5-3/8" (139 mm) and less is entered in 2-Sided scanning setting, an original cannot be scanned.

If the horizontal dimension of the original is less than 3-1/2" (89 mm), use the document glass.

4	(2) Enter the Y (vertical) dimension of the
	original.
	Touch the [Y] key and enter the Y (vertical) dimension of
	the original with the	keys. When the document

glass is used, enter a number from 1" to 8-1/2" (25 mm to 216 mm).

When the automatic document feeder is used, enter a number from 4" to 8-1/2" (100 mm to 216 mm).

If the vertical dimension of the original is less than 4" (100 mm), use the document glass.

(3) Touch the [OK] key.

Touch the [OK] key next to the [Cancel] key to complete the setting and return to the screen of step 3.

When a number from 11-3/4" to 14" (298 mm to 356 mm) to the X (horizontal) dimension and a number from 1" to

3-7/8" (25 mm to 99 mm) to the Y (vertical) dimension are entered at the same time, an original cannot be scanned.

Scan/Original		OK
	Scan Size	Send Size
	X11 Y8½	Auto
5		Image Orientation
2-Sided	2-Sided
Booklet	Tablet

Touch the [OK] key.

The specified size appears in the [Scan Size] key.

•When the scan size is specified by numerical values, the send size cannot be specified.

•When the automatic document feeder is used, an original longer than 11-5/8" (297 mm) can be scanned (maximum width 19-5/8" (500 mm)). In this case, touch the [Long Size] key in the screen of step 3.

☞Specifying the original scan size (by paper size) (page 5-52)

5-54

Contents