Sharp MX-C311, MX-C401 Specify the original size, Press the [BLACK & WHITE START] key to scan the front of the card

FACSIMILE

		(1)				(A)		(B)	(2)
Fax/Special Modes									OK
Card Shot							Cancel		OK
	X		3	38
					(1~8 1/2)
								Fit to
					inch
								Send Size
	Y		2	18
					inch
					(1~8 1/2)
							Size Reset

4

Y

X

Specify the original size.

(1)Enter the original size.

•Touch the [X] key and enter the horizontal dimension

(X) of the original with the keys.

•Touch the [Y] key and enter the vertical dimension (Y)

of the original with the keys.

(A)To return the original size to the default size, touch the [Size Reset] key.

(B)To automatically enlarge or reduce the image size to the send size, touch the [Fit to Send Size] key. Do not touch this key if you wish to scan the original at the original size that you entered.

(2)Touch the [OK] key.

• The send size is automatically selected based on the original size you entered.

• After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the send size. In this case, the screen of step 3 appears when you touch the scan size key. For the procedure for setting the send size, see "Specifying the send size of the original" (page 4-50).

Press the [BLACK & WHITE START] key to scan the front of the card.

5

To cancel scanning...

Press the [STOP] key ().

Turn the card over so that the back is face down, and press the [BLACK & WHITE START] key to scan the back of the card.

6 Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.

To cancel scanning...

Press the [STOP] key ().

4-73

Contents