FACSIMILE

Press the [BLACK & WHITE START] key.

Scanning begins.

If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished.

If you are scanning the original on the document glass, scan each page one page at a time.

5 When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.

A beep will sound to indicate that scanning is finished.

To cancel scanning...

Press the [STOP] key () to cancel the operation.

For a broadcast transmission, changes to the transaction report print conditions apply to all destinations.

To cancel the transaction report setting...

Touch the [Cancel] key in the screen of step 4.

System Settings (Administrator): Transaction Report Print Select Setting

This is used to set the conditions for printing transaction reports.

The factory default setting is

 

.

 

 

 

 

 

 

 

 

 

 

Single Sending: Print Out All Report/

 

Print Out Error Report Only

/No Printed Report

 

 

 

 

 

Broadcasting:

Print Out All Report

/Print Out Error Report Only/No Printed Report

 

 

 

 

Receiving:

Print Out All Report/Print Out Error Report Only/

No Printed Report

 

Confidential Reception (fax mode): Print Out Notice Page /No Printed Report

System Settings (Administrator): Original Print on Transaction Report

This is used to have part of the transmitted original printed on the transaction report.

4-81

Contents