Sharp MX-C311, MX-C401 Touch the [OK] key, Touch the [OK] key, Touch the key of the desired destination position

COPIER

Stamp

Move OK

Select the location to move the selected item.

36

25

14

Touch the key of the desired destination position.

The touched position key is highlighted and the print position changes.

The keys that show the print positions will appear as follows depending on the state of the settings.

4

1

1

1

Not selected, stamp setting has not been selected.

Selected during selection of the stamp setting.

Not available, stamp setting has already been selected.

If you wish to swap the position of the selected stamp item with the position of another stamp item, temporarily move either one of the items to an unoccupied position and then switch the print positions.

			Touch the [OK] key.
	Stamp
	Move	OK	If you attempt to move the stamp item to a position that is
	Select the location to move the selected item.		already occupied by another stamp item, a message will
	3	6	appear asking you if you wish to overwrite the other stamp
			item. To overwrite the other stamp item, touch the [Yes] key. To
5	2	5	cancel the move, touch the [No] key.
	1	4
				An item has been already selected to
				this location. Overwrite the item?
					No	Yes

	Stamp	Touch the [OK] key.
	Layout	OK
6	AAA AAA
	CONFIDENTIAL	DO NOT COPY
	1,2,3..

2-73

Contents