Sharp MX-C311, MX-C401 manual 563

SCANNER/INTERNET FAX

TRANSMITTING AN IMAGE

SENDING AN IMAGE IN SCAN MODE

This section explains the basic procedure for transmission in scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder).

When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added. If you wish to change the mode or destination, touch the [Cancel] key in the touch panel and then follow the procedure below.

Place the original.

• When placing the originals, orient them as shown below.

Document glass

1

Originals	Document feeder tray
	Place the original face up.

Portrait orientation*

1

1

Landscape orientation

Place the original face down with the middle aligned with the tip of the mark at the middle of the scale on the left side of the document glass.

1

1

1

1

*To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 3.

•Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission.

5-25

Contents