Sharp MX-C311, MX-C401 Place the original, Select B/W Reverse, Select the special modes, Press the [BLACK & WHITE START] key

COPIER

REVERSING BLACK AND WHITE IN A COPY (B/W Reverse)

This is used to reverse black and white in a copy to create a negative image. This function can only be used for black and white copying.

Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption.

OriginalsB/W Reverse copy

	Place the original.
1	Place the original face up in the document feeder tray, or face down on the document glass.
	After placing the original, specify the original size.

☞ORIGINAL SIZES (page 2-29)

Select the special modes.

2	(1)	Touch the [Special Modes] key.
	(2)	Touch the [Image Edit] key.

☞ [Image Edit] KEY (page 2-74)

	(1)						(2)
		Special	Modes						OK
3		Image	Edit						OK
				Photo Repeat		Mirror		Centering
						Image
					B/W
					Reverse

Select B/W Reverse.

(1)Touch the [B/W Reverse] key so that it is highlighted.

(2)Touch the [OK] key.

You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode.

Press the [BLACK & WHITE START] key.

Copying will begin.

If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.

4

When using this function, the [COLOR START] key cannot be used.

To cancel scanning and copying...

Press the [STOP] key ().

2-80

Contents