Sharp MX-C311, MX-C401 Contents, (1)(2) Select the bypass tray, Enter the paper size of the bypass tray, Press the [COLOR START] key or the [BLACK & WHITE START] key

COPIER

(1)(2) Select the bypass tray.

								(1)	Touch the paper size key of the bypass tray.
	Paper Select						OK
								(2)	Touch the [OK] key.
			Paper Tray		Bypass Tray
7
						8½x11
		1.	8½x11	Plain
						Plain
		2.	5½x8½	Plain
		3.	8½x14	Plain
		4.	8½x11	Plain

Press the [COLOR START] key or the [BLACK & WHITE START] key.

Scanning begins.

•If the originals were placed in the document feeder tray, the originals are copied.

•If you placed the originals on the document glass, scan each page one page at a time.

When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then

8 press the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original. )

To cancel scanning of the original and copying...

Press the [STOP] key ().

Enter the paper size of the bypass tray

When the [Custom Size] key is touched, the paper size entry screen appears.

Bypass Tray Type/Size Setting								OK
Size Input								OK
	X14	Y8½
			X	14		(5	1/2~14)	AB
						inch
	X14	Y8½
			Y	8	½	inch		Inch
						(5 1/2~8 1/2)
	X14	Y8½

Touch the [X] key and enter the horizontal dimension of

the paper with the keys, and then touch the [Y] key and enter the vertical dimension. When finished, touch the [OK] key.

Stored custom paper sizes appear in the keys on the left side of the screen. Custom paper sizes are stored in the system settings. For details, see "Paper Tray Settings" (page 7-13)in "7. SYSTEM SETTINGS". If the key for the size that you wish to enter appears, touch that key.

2-39

Contents