Sharp MX-C311, MX-C401 Place the original, Open the automatic document feeder, Close the automatic document feeder

BEFORE USING THE MACHINE

PLACING THE ORIGINAL ON THE DOCUMENT GLASS

This section explains how to place the original on the document glass.

Allowed original sizes

Maximum original size

Standard sizes

8-1/2" (height) x 11" (width)

A4: 210 mm (height) x 297 mm (width)

Non-standard sizes

8-1/2" (height) x 11-11/16" (width)

216 mm (height) x 297 mm (width)

When the original is a non-standard size, see the appropriate explanation below for the mode you are using.

☞2. COPIER "SPECIFYING THE ORIGINAL SIZE" (page 2-29)

☞4. FACSIMILE "IMAGE SETTINGS" (page 4-43)

☞5. SCANNER / INTERNET FAX "IMAGE SETTINGS" (page 5-49)

Open the automatic document feeder.

1

Place the original.

Place the original face down in the left center position of the document glass.

Document glass scale mark

2

5-1/2" x 8-1/2"

(A5)

B5

8-1/2" x 11" (A4)

All originals should be placed in the left center position.

Align the middle of the original with the tip of the mark.

Close the automatic document feeder.

After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner.

3

1-36

Contents