Sharp MX-C311, MX-C401 Touch the [Read-End]key, sets) with the numeric keys, Set the number of copies (number of, START] key or the [BLACK & WHITE START] key

COPIER

	Color Mode									Special Modes
	Full Color
									Plain	2-Sided Copy
									8½x11
										Output
	Exposure				1.	8½x11
		Auto			2.	5½x8½				File
					3.	8½x14
					4.	8½x11
6
										Quick File
	Copy Ratio		Original				Paper Select
	100%							Auto
							8½x11
				8½x11
							Plain

Check the paper to be used and the color mode.

Make sure that the desired paper (tray) and color mode are selected.

•To change the paper (tray), touch the [Paper Select] key.

☞PAPER TRAYS (page 2-9)

•To change the color mode, touch the [Color Mode] key.

☞COLOR COPY MODES (page 2-21)

For some original size settings, the same size of paper as the original may not be automatically selected. In this case, manually change the paper size.

							Set the number of copies (number of
						7
							sets) with the numeric keys.
					Special Modes
					2-Sided Copy
7			Plain
	• Up to 999 copies (sets) can be set.
	• A single copy can be made even if "0" appears for the number of copies.
	If an incorrect number of copies is set...
	Press the [CLEAR] key (			) and then enter the correct number.
8	Press the [COLOR START] key or the [BLACK & WHITE START] key.
	Scanning begins.
	Remove the original and place the next original, and then press the [COLOR
9	START] key or the [BLACK & WHITE START] key.
	Repeat this step until all originals have been scanned.
	For the second original and following originals, use the same [START] key as you did for the first original.
							Touch the [Read-End] key.
		Place next original. Press [Start].
		When finished, press [Read-End].
					Read-End
10
	To cancel scanning of the original and copying...
	Press the [STOP] key (			).

System Settings (Administrator): Initial Status Settings (2-Sided Copy)

The default 2-sided copy mode can be changed.

2-20

Contents