Sharp MX-C311, MX-C401 manual 344

COPIER

STORING COPY OPERATIONS (Job Programs)

A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings can be retrieved and used for a copy job by means of a simple operation.

For example, suppose 8-1/2" x 11" (A4) size CAD drawings are copied once a month for archive purposes using the following settings:

8-1/2" x 11" (A4) size CAD drawings		(1)		The 8-1/2" x 11" (A4) size CAD drawings
				are reduced to 5-1/2" x 8-1/2"(A5) size.
	Copies	(2)		The drawings have fine lines that do not
				show clearly, and thus a dark exposure
				setting (level 4) is used.
			(3)	To reduce paper use by half, 2-sided
				copying is used.

When a job program is not stored			When a job program is stored
8-1/2" x 11" (A4) to 5-1/2" x 8-1/2"(A5) reduction
				Press the [#/P] key.
Change the exposure setting
	Job Programs					Exit
		Press program number.
Select 2-sided copying
						1
			1	2	3
						4
			4	5	6
			7	8	9
Press the [COLOR START] key or
			10	11	12
the [BLACK & WHITE START] key.
			Recall		Store/Delete
			Touch the stored program key.

	Press the [COLOR START] key or
	the [BLACK & WHITE START] key.
Considerable time is required to copy the drawings each	The settings are stored in a job program, so they can be
month because the above settings must be selected.	selected by the touch of a key. This is simple and takes no time.
In addition, mistakes are occasionally made when selecting	In addition, the settings are all stored so there are no chances
the settings, so some copies must be redone.	for mistakes, and thus no need to redo copies due to setting
	mistakes.

• Up to 48 job programs can be stored. The job programs are retained even if an interruption occurs in the power supply.

• Job programs can also be stored in the Web pages. Click [Job program] and then [Copy] in the Web page menu to store a job program.

2-108

Contents