Sharp MX-C311, MX-C401 Place the original, Touch the [Paper Select] key, Place paper in the bypass tray

COPIER

MAKING COPIES USING THE BYPASS TRAY

In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special media.

For detailed information on paper that can be loaded in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER" (page 1-26)in "1. BEFORE USING THE MACHINE". For precautions when loading paper in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" (page 1-31)in "1. BEFORE USING THE MACHINE".

1

2

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

After placing the original, specify the original size.

☞ORIGINAL SIZES (page 2-29)

When placing the originals on the document glass...

After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner.

Place paper in the bypass tray.

Insert the paper with print side face down.

When loading paper larger than 8-1/2" x 11" or A4, be sure to pull out the bypass tray extension. Pull the bypass tray extension all the way out. If the bypass tray extension is not pulled all the way out, the size of the loaded paper will not be correctly displayed.

									Touch the [Paper Select] key.
	Color Mode							Special Modes
	Full Color
							Plain	2-Sided Copy
							8½x11
								Output
	Exposure			1.	8½x11
				2.	5½x8½
3		Auto		3.	8½x14			File
				4.	8½x11
								Quick File
	Copy Ratio		Original			Paper Select
	100%					Auto
						8½x11
						Plain

2-37

Contents