Sharp MX-C311, MX-C401 Touch the [Paper Select] key, Select the tray that you want to use

COPIER

PAPER TRAYS

The machine is set to automatically select a tray that has the same size of paper as the size of the placed original (automatic paper tray selection).

If the correct paper size is not selected or you wish to change the paper size, you can select the paper tray manually.

Touch the [Paper Select] key.

Color Mode					Special Modes
Full Color
					2-Sided Copy
				Plain
				8½x11
					Output
Exposure		1.	8½x11
Auto	2.		5½x8½		File
		8½x14
	4.		8½x11

Quick File

	Copy Ratio	Original	Paper Select
	100%		Auto
			8½x11
			Plain
1
	You can also touch the paper size display (A) to open the paper tray settings.
								(A)
					Color Mode				Special Modes
					Full Color
									2-Sided Copy
									Plain
									8½x11
									Output
					Exposure	1. 8½x11
					Auto	2.	5½x8½		File
						3. 8½x14
						4.	8½x11
									Quick File
					Copy Ratio	Original		Paper Select
				100%					Auto
									8½x11
									Plain

	(1)						(2)
		Paper Select								OK
					Paper Tray			Bypass Tray
2
									8½x11
			1.	8½x11		Plain
									Plain
			2.	5½x8½		Plain

Select the tray that you want to use.

(1)Touch the key of the desired tray.

(2)Touch the [OK] key.

You will return to the base screen and the selected tray will be highlighted.

3.	8½x14	Plain
4.	8½x11	Plain

If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper, that tray will be automatically selected and the copy job will continue.

To return to automatic paper tray selection after selecting a tray manually, press the [CLEAR ALL] key ().

System Settings (Administrator): Initial Status Settings (Paper Tray)

Use this setting to change the tray that is selected by default.

2-9

Contents