Sharp MX-C311, MX-C401 manual 270

COPIER

OUTPUT

To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions that can be selected are sort, group, offset, and staple sort. All explanations of the settings below assume that a finisher is installed.

(5)(6)

				Output					OK
		(1)
					Offset
		(2)
							Sort
		(3)			Staple
							Sort
		(4)
						Group
(1)	[Offset] key
			(3)					[Staple Sort] key
	This is used to offset each set of output from the previous							This is used to sort output into sets, staple each set, and
	set.							deliver the sets to the tray. (Note that the sets will not be
	The offset function operates when the checkbox is							offset in the output tray.)
	selected	and does not operate when the checkbox is						☞ Staple sort function (page 2-36)
	not selected	. (The offset checkmark is automatically						[Group] key
			(4)
	cleared when the staple sort function is selected.)							This is used to group copies by page.
	☞ Offset function (page 2-35)
(2)	[Sort] key							☞ Group mode (page 2-35)
			(5)					Output display
	This is used to sort (collate) output into sets.							An icon will appear to indicate the output mode.
	☞ Sort mode (page 2-35)
			(6)					[OK] key
								Touch this key to close the output screen and return to
								the base screen.

The above screen shows the keys that appear when a finisher is installed. The keys that appear will vary depending on what peripheral devices are installed.

In addition, it may not be possible to select some keys depending what peripheral devices are installed. If different from the above screen, refer to the screen below.

Example

The screen when a finisher is not installed.

Output OK

Sort

Group

2-34

Contents