Sharp MX-C311, MX-C401 Press the [BLACK & WHITE START] key, 6 and press the [BLACK & WHITE START] key, Check the original scan size and placement orientation

SCANNER/INTERNET FAX

(1)

(2)

Scan

Internet Fax

Fax

USB Mem. Scan

PC Scan

Address Book

Original

Scan:

8½x11

Send:

Auto

Address Entry

Exposure

Auto

Send Settings

Resolution

200X100dpi

Address Review

File Format

TIFF-F

File

Special Modes

3

Quick File

I-Fax Manual

Reception

Switch to Internet fax mode and display the image settings screen.

(1)Touch the [Internet Fax] tab.

(2)Touch the [Original] key.

The current settings for [Original], [Exposure], [Resolution], and [File Format] are indicated at the right of each key. To change a setting, touch the appropriate key.

☞AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) (page 5-50),SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (page 5-51),CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE (page 5-57),CHANGING THE RESOLUTION (page 5-59),CHANGING THE FILE FORMAT (page 5-60),SPECIAL MODES (page 5-65)

	(1)	(2)	(3)
Internet Fax/Original			OK
	Scan Size	100% Send Size
	8½x11	Auto
		Image Orientation
2-Sided	2-Sided
Booklet	Tablet

4

Check the original scan size and placement orientation.

In order to set the orientation of the image to be sent, check the size and orientation of the original that were set in step 1.

(1) Check the scan size.

Check if the size of the placed original is displayed. If the displayed size is different from the size of the placed original, set the original size.

☞SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (page 5-51)

(2)Touch the appropriate orientation key.

If the top edge of the original is up, touch the key. If

the top edge of the original is to the left, touch the key.

(3) Touch the [OK] key.

You will return to the screen of step 2.

• The placement orientation of the original is initially set to . If you placed the original with the top edge to the left, this step is not necessary.

• The original size set in the system settings appears as the original size.

Press the [BLACK & WHITE START] key.

Scanning begins.

5 • If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, go to step 7. To scan more pages, go to the next step.

• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission will take place.

If the original was placed on the document glass, replace it with the next original

6 and press the [BLACK & WHITE START] key.

Repeat until all originals have been scanned.

5-38

Contents