COPIER

(1)(2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Proof Copy

 

 

OK

 

 

 

 

 

 

 

 

Color Mode

 

Paper Select

 

2-Sided Copy

 

 

 

 

Output

 

Special Modes

 

 

 

 

 

 

 

7

Change the settings.

(1)Touch the key of the setting that you want to change.

The setting screen of the touched key opens. Change the settings and touch the [OK] key.

(2) Touch the [OK] key.

• To change the number of sets printed, set the desired number of copies (sets) with the numeric keys. After changing the number of sets, touch the [End] key in the touch panel (not the [START] key) to print the sets.

•Special modes that can be adjusted are Margin Shift, Pamphlet Copy, Transparency Inserts, 2in1, and Stamp.

•For Pamphlet Copy, and 2in1, only changes to the settings of the functions can be made; the functions cannot be newly added or deleted.

•When transparency film is used, the settings can be changed, new settings can be added, and the function can be canceled. However, this is not possible when pamphlet copying is enabled.

Press the [COLOR START] key or the [BLACK & WHITE START] key.

8 One set of copies is printed again using the adjusted settings. Check the results. If further adjustments are needed, repeat steps 6 through 8. (Repeating Proof Copy does not decrease the remaining number of sets to be printed.)

Press [End] to continue.

To make a proof copy again, press [Start].

9

ChangeEnd

 

To cancel scanning and copying...

Press the [STOP] key ().

Touch the [End] key.

You will return to the base screen of copy mode and the remaining sets will be printed.

If Proof Copy is executed while the machine is printing another job, the other job is interrupted and the proof copies are printed. The previous job will resume after the proof copies are printed.

However, if proof copy is executed during output of a job for which both two-sided printing and stapling are enabled, the proof copy will be output after the job in progress is finished.

If the [End] key is touched to execute printing of the remaining sets while the machine is printing another job, the remaining sets will be printed after all previously reserved jobs are completed.

2-93

Contents