FACSIMILE

POLLING MEMORY TRANSMISSION USING F-CODES

When your machine receives a transmission request from another machine, this function sends a fax stored in an F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the F-code configured in your machine or transmission will not take place.

The document to be transmitted must be scanned into an F-code polling memory box.

Transmission request (polling) using an F-code

The other

Sub-address:

AAAAAAAA

 

Passcode:

XXXXXXXX

The machine

machine

 

 

F-code polling memory box

 

 

 

Box name: BBBB

Sub-address: AAAAAAAA

Passcode: XXXXXXXX

Transmission

System Settings: F-Code Memory Box (page 7-97)

This is used to create memory boxes (polling memory) for F-code polling memory transmission.

A memory box name, sub-address, and passcode are programmed in each box.

SCANNING A DOCUMENT INTO A MEMORY BOX FOR F-CODE POLLING TRANSMISSION

Follow these steps to scan a document into a memory box (polling memory) for F-code polling transmission.

 

Place the original.

1

Place the original face up in the document feeder tray, or face down on the document glass.

When the original is a different size than the size setting, set the original size.

☞SPECIFYING THE SCAN SIZE AND SEND SIZE (page 4-45)

Select the special modes.

(1)

Touch the [Special Modes] key.

2 (2)

Touch the

keys to switch through the screens.

(3)Touch the [Memory Box] key.

☞SPECIAL MODES (page 4-64)

4-100

Contents