Sharp MX-C311, MX-C401 manual 249

COPIER

			(1)			(2)		Specify the original size.
								(1) Touch the appropriate original size key.
	Original						OK
								(2) Touch the [OK] key.
		5½x8½		8½x14
							AB
3		8½x11		8½x1325
							Inch
		8½x13
		Size Input			Custom Size		None

When placing an AB size or non-standard size original, specify the original size as explained in "ORIGINAL SIZES" (page 2-29).

	Color Mode			Special Modes
	Full Color
				2-Sided Copy
				Plain
				8½x11
				Output
	Exposure	1. 8½x11
	Auto	2. 5½x8½		File
		3.	8½x14
		4.	8½x11
4				Quick File
	Copy Ratio	Original		Paper Select
	100%			Auto
		8½x11		8½x11
				Plain

Check the paper to be used and the color mode.

Make sure that the desired paper (tray) and color mode are selected.

•To change the paper (tray), touch the [Paper Select] key.

☞PAPER TRAYS (page 2-9)

•To change the color mode, touch the [Color Mode] key.

☞COLOR COPY MODES (page 2-21)

For some original size settings, the same size of paper as the original may not be automatically selected. In this case, manually change the paper size.

7

Special Modes

2-Sided Copy

Plain

5

• Up to 999 copies (sets) can be set.

Set the number of copies (number of sets) with the numeric keys.

• A single copy can be made even if "0" appears for the number of copies.

If an incorrect number of copies is set...

Press the [CLEAR] key ( ) and then enter the correct number.

Press the [COLOR START] key or the [BLACK & WHITE START] key.

Normally copying will start.

Depending on the copy settings (2-sided copying, etc.), copying may not begin until all originals have been scanned. In this

6 case, go to the next step.

Even if a color mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key is pressed.

2-13

Contents