Sharp MX-C311, MX-C401 Contents, Select the file format, Changing the format (Internet fax mode), Switch to Internet fax mode and display the file format settings screen

SCANNER/INTERNET FAX

Changing the format (Internet fax mode)

The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not support full mode (it only supports simple mode), follow the steps below to select [TIFF-S].

Switch to Internet fax mode and display the file format settings screen.

1	(1) Touch the [Internet Fax] tab.
	(2) Touch the [File Format] key.
	☞ IMAGE SETTINGS (page 5-49)
				(1)	(2)			Select the file format.
								(1) Touch the key of the desired format.
		Internet Fax/File Format					OK
								If you selected [TIFF-F], select the compression mode.
2								(2) Touch the [OK] key.
			File Type		Compression Mode
			TIFF-S	TIFF-F		MH (G3)
						MMR (G4)

When [TIFF-S] is selected, the transmission settings are restricted as follows:

• Resolution:	The selections are [200X100dpi] and [200X200dpi]. If [TIFF-S] is selected after [200X400dpi],
	[400X400dpi] or [600X600dpi] is selected, the resolution automatically changes to [200X200dpi].
• Send size:	Always 8-1/2" x 11" (A4) in landscape orientation. If [TIFF-S] is selected after the send size is changed,
	the send size is automatically changed to 8-1/2" x 11" (A4) in landscape orientation. If a size larger than
	8-1/2" x 11" (A4) is scanned, the size will automatically be reduced to 8-1/2" x 11" (A4) in landscape
	orientation. When this format is included in a broadcast transmission, the image will be transmitted to all
	destinations at 8-1/2" x 11" (A4) in landscape orientation.

• Special modes: When a ratio setting is selected and the original size is entered, Card Shot cannot be used.

System Settings (Administrator): Compression Setting

This is used to set the default compression mode for Internet fax transmission.

5-63

Contents