Sharp MX-C311, MX-C401 Check the original scan size and placement orientation, Switch to USB memory mode and display the image settings screen

SCANNER/INTERNET FAX

(2)

(1)

Scan

Internet Fax

Fax

USB Mem. Scan

PC Scan

Original

Scan:

8½x11

Send:

Auto

File Name

Exposure

Auto

Resolution

200X200dpi

File Format

PDF

PDF

Color Mode

Auto/Grayscale

Mono2

Special Modes

3

Switch to USB memory mode and display the image settings screen.

(1) Touch the [USB Mem. Scan] tab

If the [USB Mem. Scan] tab does not appear, touch the tab to move the screen.

(2) Touch the [Original] key.

•When scanning to USB memory, there is no need to specify the destination.

•If a destination of another mode has been previously specified, a message will appear when you change to USB memory mode indicating that the destination setting will be cleared. Touch the [OK] key in the message screen and go to the next step.

•The current settings for [Original], [Exposure], [Resolution], [File Format], and [Color Mode] are indicated at the right of each key. To change a setting, touch the appropriate key.

☞AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) (page 5-50),SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (page 5-51),CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE (page 5-57),CHANGING THE RESOLUTION (page 5-59),CHANGING THE FILE FORMAT (page 5-60),CHANGING THE COLOR MODE (page 5-64),SPECIAL MODES (page 5-65)

	(1)	(2)	(3)
USB Mem. Scan/Original			OK
	Scan Size	100% Send Size
	8½x11	Auto
		Image Orientation
2-Sided	2-Sided
Booklet	Tablet

4

Check the original scan size and placement orientation.

To make sure that the original is scanned in the correct orientation (the orientation in which the top edge of the original appears at the top of the display), check the size and orientation of the original placed in step 1.

(1) Check the scan size.

Check if the size of the placed original is displayed. If the displayed size is different from the size of the placed original, set the original size.

☞SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (page 5-51)

(2)Touch the appropriate orientation key.

If the top edge of the original is up, touch the key. If the top edge of the original is to the left, touch the key.

(3) Touch the [OK] key.

You will return to the screen of step 3.

•The placement orientation of the original is initially set to . If you placed the original with the top edge to the left, this step is not necessary.

•The original size set in the system settings appears as the original size.

5-33

Contents