Sharp MX-C311, MX-C401 Touch the [Read-End]key, (1)(2) Select job build mode

SCANNER/INTERNET FAX

(1)(2) Select job build mode.

							(1) Touch the [Job Build] key so that it is
	Scan/Special Modes					OK
							highlighted.
							(2) Touch the [OK] key.
		Program		Erase	Timer
4
		Card Shot		Job	Slow Scan
				Build	Mode
		File	Quick File		Business
					Card Scan
		Suppress
		Background

Press the [COLOR START] key or the [BLACK & WHITE START] key to scan the first set of originals.

5 If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.

To cancel scanning...

Press the [STOP] key () to cancel the operation.

Insert the next set of originals and press the [COLOR START] key or the [BLACK & WHITE START] key.

Press the [START] key pressed in step 5.

6 Repeat until all originals have been scanned.

To cancel scanning...

Press the [STOP] key () to cancel the operation. All scanned data will be cleared.

Touch the [Read-End] key.

Place next original.		(Pg.No.x)
Press [Start].
When finished,	press [Read-End].
		Configure	Read-End

7

• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved.

•The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original page scanned.

If the memory becomes full during scanning, a message will appear and the transmission will be canceled.

To cancel the job build function....

Touch the [Job Build] key in the screen of step 4 so that it is not highlighted.

5-77

Contents