Sharp MX-C311, MX-C401 manual 610

SCANNER/INTERNET FAX

(1)			(2)						(3)
	Scan/Special Modes								OK
	Timer						Cancel		OK
		Day of the Week				Time
				10				00
					hh.				mm.

4

Set the time with the keys.

(1) Specify the day.

If you do not wish to specify a day, select [---]. In this case, transmission will begin when the time specified in

(2) arrives.

(2)Specify the time (hour, minute)

Select the time in 24-hour format.

You can also directly touch a numeric display key to change the setting with the numeric keys.

(3) Touch the [OK] key.

When this screen is opened, the setting will show the current time. If the time is not correct, press the [CLEAR ALL] key ( ) to cancel the operation. Correct the time in the system settings and then perform the timer transmission procedure.

☞CHECKING THE DATE AND TIME (page 5-5)

Press the [COLOR START] key or the [BLACK & WHITE START] key.

Scanning begins.

•If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished.

•If you are scanning the original on the document glass, scan each page one page at a time.

When scanning finishes, place the next original and press the [COLOR START] key or the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.

5 A beep will sound to indicate that scanning is finished.

• If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.

• The original is scanned into memory. The original cannot be scanned at a specified time.

To cancel scanning...

Press the [STOP] key () to cancel the operation.

• The time can be specified up to a week in advance.

• Up to 94 timer transmissions can be stored at once.

•If another transmission is in progress when the specified time arrives, the timer transmission will begin after that transmission is finished.

•Other transmissions can be performed as usual after a timer transmission is stored.

•A timer transmission can be deleted in the job status screen.

•If a timer transmission is given priority in the job status screen, the time specification is canceled. The transmission will begin as soon as the job in progress is completed.

☞GIVING PRIORITY TO A SCAN TRANSMISSION JOB (page 5-92)

To cancel timer transmission...

Touch the [Cancel] key in the screen of step 4.

5-72

Contents