Sharp MX-C311, MX-C401 Touch the [XY Zoom] key, Set the horizontal and vertical ratios

COPIER

ENLARGING/REDUCING THE LENGTH AND WIDTH SEPARATELY (XY Zoom)

The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately. Both the horizontal and vertical ratios can be set from 50% to 200% in increments of 1%. Touch the [Copy Ratio] key in the base screen of copy mode and then follow the steps below.

When 50% is selected for the horizontal ratio and 70% is selected for the vertical ratio

OriginalCopy

Copy RatioOK

							100
								%
	8½x11		5½x8½	64%					129%	5½x8½	8½x11
												1
												2
1							Zoom
	8½x14		8½x11	77%
						100%
		Auto Image			XY Zoom

Touch the [XY Zoom] key.

	(2)			(1), (3)			(4)
		Copy Ratio								OK
		XY Zoom								Cancel
					X	50
							%
					Y	70
			50%				%	129%
			64%		Zoom				200%
			77%
					100%
2
			(A)	(B)					(A)

Set the horizontal and vertical ratios.

(1) Touch the [X] key.

The [X] key will be highlighted and the horizontal ratio can be set.

(2)Touch one of the preset ratio keys (A) and the zoom keys (B) to set the X (horizontal) ratio.

(A)A touched preset ratio key will not be highlighted.

(B)The zoom keys can be touched to set the ratio from 50% to 200% in increments of 1%.

(3)Touch the [Y] key and set the Y (vertical) ratio in the same way as the [X] key.

(4)Touch the [OK] key.

After touching the [OK] key, make sure that a paper size suitable for the ratio is selected.

• To quickly select a ratio, touch a preset ratio key (A) to select a ratio close to the desired ratio and then use the zoom keys (B) for fine adjustment.

•As an alternative to touching the keys, you can also directly touch the numeric value display key and change the value with the numeric keys.

When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both 50% to 200%.

To cancel an XY zoom setting...

To cancel an XY Zoom setting, touch the [XY Zoom] key or the [Cancel] key.

2-28

Contents