Sharp MX-C311, MX-C401 Contents, Enter the original size, Touch the [Size Input] key, Specifying a non-standardoriginal size

COPIER

Specifying a non-standard original size

	Original			OK
		5½x8½	8½x14
1
				AB
		8½x11	8½x1325
				Inch
		8½x13

Touch the [Size Input] key.

Size Input Custom Size None

		(1), (2)			(3)
Original					OK
Size Input				Cancel	OK
	X	11		inch
				(1~14)
	Y	8	½	inch
				(1~8 1/2)

Enter the original size.

(1)Enter the X (horizontal) dimension of the original.

With the [X] key highlighted, enter the X (horizontal)

dimension of the original with the keys. When the document glass is used, enter a number from 1" to 11-5/8" (25 mm to 297 mm).

When the automatic document feeder is used, enter a number from 3-1/2" to 14" (89 mm to 356 mm).

When a number which is from 5-3/8" (139 mm) and less is entered in 2-Sided copy mode, an original cannot be scanned.

If the horizontal dimension of the original is less than 3-1/2" (89 mm), use the document glass.

2	(2) Enter the Y (vertical) dimension of the
	original.
	Touch the [Y] key and enter the Y (vertical) dimension of
	the original with the	keys. When the document

glass is used, enter a number from 1" to 8-1/2" (25 mm to 216 mm).

When the automatic document feeder is used, enter a number from 4" to 8-1/2" (100 mm to 216 mm).

If the vertical dimension of the original is less than 4" (100 mm), use the document glass.

(3) Touch the [OK] key.

You will return to the base screen.

Make sure that the entered dimensions appear in the [Original] key.

When a number from 11-3/4" to 14" (298 mm to 356 mm) to the X (horizontal) dimension and a number from 1" to

3-7/8" (25 mm to 99 mm) to the Y (vertical) dimension are entered at the same time, an original cannot be scanned.

2-30

Contents