Siemens D410 appendix Quantity framework for TM15/TM17 High Feature, Additional references

Commissioning (software) 4.6 Using drive-related I/Os by SIMOTION

Table 4-10 Global measuring inputs, configuration of the Measuring Input TO

Axis measuring system no.	Under axis measuring system number, enter the number of the used
	encoder system (namely, encoder 1, 2 or 3). Encoder system 1 is the
	default setting.
Global measuring	Activate the checkbox when a global measuring input is used.
Logical hardware address	Enter here the logical HW address and the bit number of the used
and bit number:	input.
	Start address message frame 39x + 3, bit 1 for input DI/DO 9
	Start address message frame 39x + 3, bit 2 for input DI/DO 10
	Start address message frame 39x + 3, bit 3 for input DI/DO 11

Detailed information is contained in the SIMOTION Motion Control Output Cams and Measuring Outputs Function Manual.

4.6.8Outputs of cam outputs and probe inputs on TM15/TM17 High Feature

Quantity framework for TM15/TM17 High Feature

The TM15/TM17 High Feature Terminal Modules can be used to extend the number of outputs for cam outputs and probe inputs that can be installed.

●TM15, maximum 24 outputs for cam outputs / probe inputs

●TM17 High Feature, maximum 16 outputs for cam outputs / probe inputs

Additional references

Detailed information for the configuration is contained in the following documents

●SIMOTION Output Cams and Measuring Inputs Function Manual

●TM15/TM17 High Feature Terminal Modules Commissioning Manual

D410	105
Commissioning Manual, 08/2008 Edition