Siemens D410 appendix Table of contents

Table of contents

	Preface	......................................................................................................................................................	3
1	Description		11
	1.1	System overview	11
	1.2	System components	14
	1.3	SIMOTION D410 DP display	19
	1.4	SIMOTION D410 PN display	23
	1.5	The CompactFlash card	27
	1.6	Licensing	28
	1.7	Safety information	29
2	Commissioning (hardware)		31
	2.1	Prerequisites for commissioning	31
	2.2	Inserting the Compact Flash card	32
	2.3	Switching on the power supply	33
	2.4	RESET button	34
	2.5	User memory concept	35
	2.5.1	SIMOTION D410 memory model	35
	2.5.2	Properties of the user memories	36
	2.5.3	Operator actions and their impact on user memory	38
3	Configuring SIMOTION D410		43
	3.1	Software requirements	43
	3.2	Inserting SIMOTION D410 into a project	43
	3.3	Configuring the PROFIBUS DP interface (only D410 DP)	46
	3.3.1	General information about PROFIBUS DP communication	46
	3.3.2	Assignment of the PROFIBUS addresses in HW Config	47
	3.3.3	Operating SIMOTION D410 on PROFIBUS DP	48
	3.3.4	Creating a new PROFIBUS DP subnet	48
	3.3.5	Setting the DP cycle and system cycle clocks	49
	3.3.6	Rules for SIMOTION D410 DP	50
	3.4	Configuring PROFINET (only for D410 PN)	52
	3.4.1	General information about PROFINET communication	52
	3.4.2	Operating SIMOTION D410 PN on PROFINET	53
	3.4.3	Setting the send cycles and system clocks	56
	3.4.4	Rules for SIMOTION D410 PN	58
4	Commissioning (software)		61
	4.1	Overview of commissioning	61
	4.2	Configuring the system in offline mode	62
D410			7
Commissioning Manual, 08/2008 Edition