
Operating the Telephone with the optiPoint display module
Step by Step
Frank Miller
Using Repdial Keys
If you press a selected dialing key with a stored number (see page 121), the number appears in the Caller Box.
Press the programmed function key.
Call Control
Mon 07/03/05 11:34AM
12345678
Calling
The stored number is displayed and dialed. When the connection is established, you are in speakerphone mode.
Repertory Dialing
With repertory dialing, you can enter dial control func- tions at any point in the repertory dialing sequence. HiPath 8000 automatically detects whether the digits represent an IP address, a number, or a URL.
Control | Action During Dialing |
Function |
|
|
|
OK | Any characters following this control func- |
| tion are sent immediately after the call has |
| been answered, and are sent as DTMF. |
|
|
Pause | Waits 3 seconds before sending any char- |
| acters following this control function. |
|
|
Consult | Establish a consultation call at this point. |
|
|
Clear | Clear the current call at this point. |
|
|
For information on programming a repdial key see page 119.