Operating the Telephone with the Display
Surviveability
If a HiPath 3000 fallback system was set up for your HiPath 8000,you will still be able to use your telephone and the functions of the outage system in case of e.g. a power outage.
If your telephone has no connection to the HiPath 8000, it will automatical- ly connect to the HiPath 3000 fallback system. The message "Temporary limited mode" is displayed.
While you are using the fallback system, the following functions are not
available: |
|
|
|
| |
• | Call Forwarding ( | page 43) |
| ||
• | Deflecting a Call ( | page 27) |
| ||
• | Conferencing ( | page 49) |
| ||
• | Voice Messages ( | page 57) |
| ||
• | Reachability ( | page 37) |
|
| |
• | Callback ( page 36) |
|
| ||
• | Using Group Features ( | page 60) |
| ||
• | Multiline Telephone – Introduction ( | page 63) | |||
• | Call Display ( | page 97) |
|
| |
• | Transferring without Consultation ( | page 32) | |||
• | Lock Phone with Forward ( page 115) | ||||
• | Delay for Call Forward on No Reply ( | page 99) | |||
• | HiPath 8000 Functions ( | page 71) |
| ||
Hot- and Warmline Function
Your service personnel can set up a hot or warm line for your or a specific telephone.
If you pick up the receiver or press the loudspeaker key on this telephone, the preset number is dialled
•immediately in case of a hot line;
•after a preset period of time in case of a warm line.
Examples:
•The elevator telephone is set to immediately dial the front desk’s tele- phone number.
•The telephone next to an
62
