Siemens OPTIPOINT420 Logging on and off at the Same Telephone, Logging on at the Telephone

DLS Mobility Function

Step by Step
Mobility
	or
> 11=Mobility?	> :
1=Log on?	> :
	o
	o
86

Logging on and off at the Same Telephone

Logging on at the Telephone

No other mobility user is logged on.

Logging on using the key

One of the function keays was set up as logon key for the mobility function.

Press the "Mobility" logon key. You are asked to enter your "Mobility ID".

Logging on using the menu

Select and confirm.

Confirm to start the logon procedure.

Enter your Mobility ID (in general, this is the same as your official telephone number).

Enter your User password (default value: "000000"). The following messages appear on the display:

•"Mobility logon: Validating request"

•"Mobility logon: Registering..."

•"Downloading user data"

When the logon procedure is completed, the LED of the "Mobility" key is on, and MOB is shown on the dis- play. If you press the "Mobility" key again, you are logged off ( page 87). If an optiPoint display module is connected, a tent-like symbol is diplayed in the top sym- bol bar ( page 132).

If an optiPoint display module is connected and you use a different language setting as "mobility user", you are asked to Restart page 130) the telephone so that the change of language setting can also be done for the optiPoint display mod- ule.