Operating the Telephone with the optiPoint display module
Step by Step
Status Message for Multiple Lines
Display of Line Information for a Ringing Line Dur- ing a Call
Prerequisite: The Show interline state function must be activated (see page 107).
If more than one line is required for line status messag- es, the following rules apply for the display:
•The lines are combined according to status and, de-
pending on priority, are displayed in accordance with the rules described on page 182.
•Each status that applies to a line is represented sole-
ly by the status icon ( page 183) .
•Each status that applies to more than one line is rep- resented by both the appropriate status icon
( page 183) and the number of lines for this sta- tus.
Secretary
Mon 07/03/05 11:34AM
Bill Smith 987654321
00:24
2
Jill Hill |
| Manager |
|
Consult/Transfer
In the above example, two lines are ringing (including the one currently displayed); lines with lower priority status are only displayed if the calls are answered (by another telephone) or cleared down.
You can answer the ringing line currently being dis- played or switch to line overview mode and select a dif- ferent line that is in call waiting mode, ringing or on hold.
