Toshiba e-STUDIO500P Xx Jam displays on the operator panel, Xx Jam displayed on operator panel

231.xx Jam displays on the operator panel

	FRU	Action
1	Fuser exit sensor	Check the sheet of media is leaving the exit sensor in the fuser and
		feeding properly into the duplex option. Check the duplex link for
		correct operation and any signs of damage. If the problem is prior to
		the duplex input sensor and in the base machine, repair as
		necessary. If the jam occurs in the duplex option prior to the duplex
		input sensor, go to step 2.
2	Duplex input sensor	If the paper does not reach the duplex input sensor, make sure the
		sensor is connected to the duplex system board. If correct, check for
		any paper or other objects that might cause a paper jam. If none are
		found, replace the duplex option assembly.
232.xx Jam displays on the operator panel

	FRU	Action
1	Duplex input sensor	If the paper reaches the duplex input sensor, but does not clear the
		sensor, make sure the sensor is connected to the duplex system
		board. If connected correctly, check for correct operation of the
		sensor. If a problem is found and cannot be corrected, replace the
		duplex option assembly. If no problem is found, check for a piece of
		paper or other object in the paper path that might cause a paper jam
		over the input sensor. If no problem is found, replace the duplex
		option assembly.
233.xx Jam displayed on operator panel

	FRU	Action
1	Duplex double feed sensor	If a sheet of paper fails to reach the double feed sensor during
		turnaround, check for any signs of paper or other objects that might
		cause the paper to jam. If no problem is found, replace the duplex
		option assembly.

Diagnostic information 2-83