Printhead removal

CAUTION: The printhead is not a serviceable FRU. Do not disassemble the printhead.

1.Remove the laser cover. See “Laser cover removal” on page 4-19.

2.Disconnect the printhead cable (A) from the printhead assembly.

3.Remove the three printhead mounting screws (B), and remove the printhead.

Note: Do the “Printhead assembly adjustment” on page 4-2whenever you remove or replace the printhead assembly or loosen the mounting screws.

Repair information 4-73

Page 278
Image 278
Toshiba e-STUDIO500P manual Printhead removal, Remove the laser cover. See Laser cover removal on