Toshiba e-STUDIO500P manual Diagnostic aids, Accessing service menus

3. Diagnostic aids

This chapter explains the tests and procedures to identify printer failures and verify repairs have corrected the problem.

Accessing service menus

There are different test menus that can be accessed during POR to identify problems with the printer.

Diagnostics Mode	1. Turn off the printer.		The Diagnostics Mode group contains the settings
	2. Press and hold	and .	and operations used while manufacturing and
			servicing the printer.
			See “Diagnostics mode” on page 3-2 for more
			information.

3.Turn on the printer.

4.Release the buttons when

Performing Self Test displays.

Configuration Menu	1. Turn off the printer.		The Configuration Menu group contains a set of
	2. Press and hold	and .	menus, settings, and operations which are
			infrequently required by a user. Generally, the
			options made available in this menu group are
			used to configure a printer for operation.
			See “Configuration menu (CONFIG MENU)” on
			page 3-25for more information.

3.Turn on the printer.

4.Release the buttons when

Performing Self Test displays.

Flash system code	1. Turn off the printer.
mode	2. Press and hold		,	,
	and	.

3.Turn on the printer.

4.Release the buttons when

Performing Self Test displays.

To run the printer diagnostic tests described in this chapter, you must put the printer in Diagnostic Mode.

Diagnostic aids 3-1