Toshiba e-STUDIO500P manual Jobs may not be restored

User attendance messages (continued)

Error	Sub	Primary message	Description/action
code	code
56	.xx	Standard Parallel Port	This error is displayed when data is sent to the printer across the parallel
		Disabled	port, but the parallel port has been disabled. Once this message is
			displayed, reporting of further errors is suppressed until the menus are
			entered, or the printer is reset. The following actions may be taken:
			•	Press		to clear the message. The printer discards any data received
				on the parallel port.
			•	Press		until Busy/Waiting appears. The following are available:
				-	Reset Printer
				-	Reset Active Bin
56	.xx	Parallel Port x Disabled	This error is displayed when data is sent to the printer across the parallel
			port, but the parallel port indicated has been disabled. Once this message is
			displayed, reporting of further errors is suppressed until the menus are
			entered, or the printer is reset. The following actions may be taken:
			•	Press		to clear the message. The printer discards any data received
				on the parallel port.
			•	Press		until Busy/Waiting appears. The following are available:
				-	Reset Printer
				-	Reset Active Bin
57	.xx	Configuration Change	The printer has attempted to restore the Print and Hold jobs from the disk
			and found that some or all of the jobs could not be restored. The printer
			could not restore jobs from the disk because the configuration of the printer
			has changed. This message alternates with the secondary message, Held
			jobs may not be restored.
			Some configuration changes that may cause this condition are:
			•	Code version change
			•	Paper handling option is removed
			•	Disk has been moved to a different model printer.
			Press			to clear the message. Some of the Print and Hold jobs stored on
			the disk will not be restored. They remain on the disk, but cannot be
			accessed.
58	.xx	Too Many Trays	This error code displays when too many input trays are attached to the
		Attached	printer.
58	.xx	Too Many Disks	This error displays when too many disks are attached to the printer.
		Installed
59	.xx	Incompatible Output	An incompatible output bin is installed. For Output Bin x, x=1, 2, or 3.
		Bin x	Remove the incompatible output bin and press				to clear the message.
			Note: If the user installed the incompatible device to satisfy a Check Device
			Connections/reattach message, the user should reinstall an associated
			compatible option or hot unplug the option.
59	.xx	Incompatible Envelope	An incompatible envelope feeder is installed.
		Feeder	Remove the incompatible feeder and press				to clear the message.
			Note: If the user installed the incompatible device to satisfy a Check Device
			Connections/reattach message, the user should reinstall an associated
			compatible option or hot unplug the option.

Diagnostic information 2-41