User attendance messages (continued)

Error

Sub

Primary message

Description/action

 

code

code

 

 

 

 

 

 

 

 

 

 

 

52

.xx

Flash Full

This message displays when there is not enough free space in the flash

 

 

 

memory to hold the resources that have been requested to be written to

 

 

 

flash.

 

 

 

 

 

 

 

53

.xx

Unformatted Flash

This message displays when the printer detects an unformatted flash at

 

 

 

power on. Press

to clear the message. The flash is marked as bad and

 

 

 

normal operation continues. Flash operations are not allowed until the flash

 

 

 

is formatted.

 

 

 

 

 

 

54

.xx

Standard Network

This error displays when a network port is detected, but the printer cannot

 

 

Software Error

establish communications with it.

 

 

 

 

54

.xx

Network x

This error displays when a network port is detected, but the printer cannot

 

 

Software Error

establish communications with it.

 

 

 

 

55

.xx

Unsupported option in

An unsupported option is installed in the specified solutions port. Power off

 

 

Slot x

the printer and remove the unsupported option in the specified slot.

 

 

 

 

55

.xx

Unsupported Flash in

An unsupported flash option is installed in the solutions port. Power off the

 

 

Slot x

printer and remove the unsupported flash option in the specified slot.

 

 

 

 

56

.xx

Standard Serial

This error displays when data is sent to the printer across the standard serial

 

 

Disabled

port, but the port has been disabled.

 

 

 

 

56

.xx

Serial Port x Disabled

This error displays when data is sent to the printer across an optional parallel

 

 

 

port, but the port has been disabled. Once this message displays, reporting

 

 

 

of further errors is suppressed until the menus are entered, or the printer is

 

 

 

reset.

 

 

 

 

 

 

 

56

.xx

Standard USB Port

Displayed when status is requested over the USB port, but the port has been

 

 

Disabled

disabled. Once the error has been displayed for the first time, reporting of

 

 

 

further errors is suppressed until the menus are entered or the printer is

 

 

 

reset.

 

 

 

 

 

 

The following actions may be taken:

 

 

 

Press

to clear the message. The printer discards any data received

 

 

 

 

on the USB port.

 

 

 

 

Press

until Busy/Waiting appears. The following are available:

 

 

 

 

-

Reset Printer

 

 

 

 

 

-

Reset Active Bin

 

 

 

 

56

.xx

Standard USB Port x

Displayed when status is requested over the USB port indicated, but the port

 

 

Disabled

has been disabled. Once the error has been displayed for the first time,

 

 

 

reporting of further errors is suppressed until the menus are entered or the

 

 

 

printer is reset.

 

 

 

 

The following actions may be taken:

 

 

 

Press

to clear the message. The printer discards any data received

 

 

 

 

on the USB port.

 

 

 

 

Press

until Busy/Waiting appears. The following are available:

 

 

 

 

-

Reset Printer

 

 

 

 

 

-

Reset Active Bin

 

 

 

 

 

 

 

 

2-40Service Manual

Page 76
Image 76
Toshiba e-STUDIO500P manual Reset Standard USB Port