Sensor Test (high capacity output stacker)
1.Select Sensor Test from OUTPUT BIN TESTS.
2.Select Output Bin x (x=number of the output option to be tested).
The following screen is displayed:
HC Bin x TP=OPpassThru=Open Full=Open NearFull=Open
•
•
•
•
3.Manually actuate each of the sensors of the
4.Press Back ( 
) or Stop ( 
) to exit the test.
Sensor Tests (5-bin mailbox)
1.Select Sensor Tests from OUTPUT BIN TESTS.
2.Select Output Bin x (x=number of the output option to be tested). The following screen is displayed:
Output Bin x
P1=OP P2=OP L=NL
•
•
3.Manually actuate each of the sensors of the
4.Press Back (
) or Stop (
) to exit the test.
Diverter Test
This test verifies the functioning of each of the
To run the Diverter Test, select Diverter Test from the OUTPUT BIN TESTS. The test runs once and stops.
