Toshiba e-STUDIO500P manual Go to Main fan on

Service error codes (9xx.xx) (continued)

Error	Sub	Display text	Description		Action
code	codes
925	.32	Too hot to do lamp	Attempting to POR machine after		Go to “925.xx—Hot fuser
		detection and NVRAM	receiving a 925.01.		service check” on page 2-91.
		bit indicates previous
		wrong lamp detected.
		Fuser page count
		between 300,000 and
		399,999.
925	.41	Lamp detection	•	115 V lamp in 220 V printer.	Go to “925.xx—Hot fuser
		performed and found	•	Lamp has excessive wattage.	service check” on page 2-91.
		error. Fuser page count
		between 400,000 and
		499,999.
925	.42	Too hot to do lamp	Attempting to POR machine after		Go to “925.xx—Hot fuser
		detection and NVRAM	receiving a 925.01.		service check” on page 2-91.
		bit indicates previous
		wrong lamp detected.
		Fuser page count
		between 400,000 and
		499,999.
925	.51	Lamp detection	•	115 V lamp in 220 V printer.	Go to “925.xx—Hot fuser
		performed and found	•	Lamp has excessive wattage.	service check” on page 2-91.
		error. Fuser page count
		stopped at 500,000 to
		preserve data.
925	.52	Too hot to do lamp	Attempting to POR machine after		Go to “925.xx—Hot fuser
		detection and NVRAM	receiving a 925.01.		service check” on page 2-91.
		bit indicates previous
		wrong lamp detected.
		Fuser page count
		stopped at 500,000 to
		preserve data.
925	.91	Lamp detection	•	115 V lamp in 220 V printer.	Go to “925.xx—Hot fuser
		performed and found	•	Lamp has excessive wattage.	service check” on page 2-91.
		error. Writes to the fuser
		information chip have
		been disabled due to a
		previous write failure.
925	.92	Too hot to do lamp	Attempting to POR machine after		Go to “925.xx—Hot fuser
		detection and NVRAM	receiving a 925.01.		service check” on page 2-91.
		bit indicates previous
		wrong lamp detected.
		Writes to the fuser
		information chip have
		been disabled due to a
		previous write failure.
927	.00	Service fan error.	•	Loose connector.	Go to “Main fan” on
			•	External blockage of the fan,	page 2-76.
				preventing it from turning.
			•	Bad fan.
927	.01	Main fan stalled.	•	External blockage of fan	Go to “Main fan” on
			•	Fan may not turn due to internal fan	page 2-76.
				problem.

Diagnostic information 2-23