Toshiba e-STUDIO500P manual Quick Test, Variable Description Value Direction of change

3.Use or to select the margin setting you need to change, and press .

The Top margin sign/value pair blinks. This indicates it is the margin value being changed.

T=xxx* B=xxx*

L=xxx* R=xxx*

4.Use to decrease or to increase the offset values, and press to confirm the value.

The message Submitting selection displays, and the original REGISTRATION screen appears with

the beside the previously selected margin setting. The print registration range is:

Variable	Description	Value	Direction of change
B=	Bottom margin	-20 to +20 Each increment causes	A positive change compresses the
		approximately 0.55 mm shift in the	image so it appears to move down
		bottom margin.	the page and a negative change
			moves the image up.
T=	Top margin	-25 to +25 Each increment causes	A positive change moves the image
		approximately 4 pels shift (at 600	down the page and increases the
		dpi).	top margin. A negative change
			moves the image up and decreases
			the top margin.
L=	Left margin	-25 to +25	A positive change moves the image
			to the right, and a negative change
			moves the image to the left. No
			compression occurs.
R=	Right margin	-10 to +10	A positive change moves the image
			to the right, and a negative change
			moves the image to the left.

5.Continue changing the settings by repeating steps 2 through 4.

6.Print another copy of the Quick Test to verify your changes.

7.To exit REGISTRATION, press Back ().

Quick Test

The Quick Test contains the following information:

•Print registration settings

•Alignment diamonds at the top and bottom

•Horizontal lines to check for skew

•General printer information, including current page count, installed memory, serial number, and code level.

To print the Quick Test page:

Note: Print the Quick Test Page on letter or A4 paper.

1.Select REGISTRATION from DIAGNOSTICS.

2.Press until the appears next to Quick Test.

The message Quick Test Printing… appears on the display.

Once the Quick Test Page completes printing, the Registration screen displays again.

Diagnostic aids 3-5