User attendance messages (continued)

Error

Sub

Primary message

Description/action

code

code

 

 

 

 

 

 

 

 

 

 

 

Install Env Feed

This message is displayed when the envelope feeder has been hot

 

 

or Cancel Job

unplugged. The printer requires the reinstallation of the feeder to print a

 

 

 

page which has been formatted by the interpreter before the feeder was

 

 

 

removed.

 

 

 

 

The following actions may be taken:

 

 

 

Install the envelope feeder.

 

 

 

Press

until Busy/Waiting displays. Select one of the following:

 

 

 

 

-

Cancel Job

 

 

 

 

-

Reset Printer

 

 

 

 

-

Reset Active Bin

 

 

 

If the message cannot be cleared, go to “Envelope feeder service check”

 

 

 

on page 2-84.

 

 

 

 

 

 

Install Tray x

Tray x=Tray 2, Tray 3, Tray 4, Tray 5.

 

 

or Cancel Job

This message is displayed when a paper handling option has been hot

 

 

 

 

 

 

unplugged. The printer requires the reinstallation of the option to print a page

 

 

 

which has been formatted by the interpreter before the option was removed.

 

 

 

The following actions may be taken:

 

 

 

Install the option.

 

 

 

Press

until Busy/Waiting displays. Select one of the following:

 

 

 

 

-

Cancel Job

 

 

 

 

-

Reset Printer

 

 

 

 

-

Reset Active Bin

If the message cannot be cleared, go to “Input tray(s) service check” on page 2-102.

Load Staples

This message displays when the Staples Empty Alarm is activated and one

 

of the following occurs:

 

There are no staples in the stapler.

 

The maximum number of staples have been fired after the engine has

 

 

reported that the staple cartridge is low.

 

The printer does not detect the staple cartridge is present.

 

The following actions may be taken:

 

Install a new staple cartridge to clear this message and select Start or

 

 

Continue to resume printing the staple job.

 

Choose to ignore the Load Staples message for this print job by pressing

 

 

 

. The printer starts or resumes printing, but does not staple the rest of

 

 

the job.

 

 

 

Press

until Busy/Waiting displays. The following actions may be

 

 

available:

 

 

 

 

-

Cancel Job

 

 

 

-

Reset Printer

 

 

 

-

Reset Active Bin

 

 

Priming Failed

This message displays when an error has occurred during the staple priming

Retry. Go/Stop?

operation. This message not only notifies the user that a specific error

 

interfered with the priming, but allows the user to request the process begin

 

again.

 

 

 

 

The following actions are available:

 

Press

to restart the priming operation.

 

Press

or

to cancel the priming operation.

2-36Service Manual

Page 72
Image 72
Toshiba e-STUDIO500P manual Following occurs