Toshiba e-STUDIO500P Understanding the printer operator panel, Menu, Stop, Navigation buttons

Understanding the printer operator panel

The operator panel on your printer is a 4-line back-lit gray scale display that can show both graphics and text. The Back, Menu, and Stop buttons are located to the left of the display, the navigation buttons are located below the display, and the numeric pad is located to the right of the display.

Display panel

Numeric pad

USB port

Indicator light

Navigation buttons Select button

The use of the buttons and the layout of the display panel are described in the following table.

Operator panel

Button	Function
	Press the Back button to return to the last screen you viewed.
Back	Note: Changes made on the screen will not be applied if you press the Back
	button.

Press the Menu button to open the menu index.

Menu	Note: The printer must be in the Ready state to access the menu index. A
	message indicating the menus are unavailable will appear if the printer is not
	ready.
	Press Stop to stop the mechanical operation of the printer. After pressing Stop,
Stop	the message Stopping is displayed. When the printer has stopped, the status
	line in the operator panel will show Stopped, and a list of options will appear.
	The Up or Down buttons are used to move up and down lists.
Navigation buttons	When navigating through a list using the Up or Down button, the cursor
	moves one line at a time. Pressing the Down button at the bottom of the
	screen changes the screen to the next whole page.
	The Left or Right buttons are used to move within a screen such as
	moving from one menu index item to another. They are also used to
	scroll through text that will not fit on the screen.
	The Select button is used to initiate action on a selection. Press Select
	when the cursor appears next to the selection you want such as
	following a link, submitting a configuration item, or when you want to
	start or cancel a job.

2-2Service Manual