Chapter 6 Trunk Spans and Dialing Rules

This keyword specifies the time (in seconds) that the AMD analysis will look for the beep at the end of the Answering Machine. If timeout occurs, the TSP will consider that the beep has been heard and play the appropriate ENCORE message. This analysis only takes place if an ENCORE message is specified to be played to Answering Machines detected during a specific campaign.

The default is twenty seconds, and should not be changed unless advised to do so by Engineering.

ANSM_USETONE

See Also:

Keyword ANSM_SILENCE.

This keyword specifies the method to be used for detecting when to play Encore messages to answering machines. The default value of this keyword is zero.

ANSM_USETONE 0

Wait for a period of silence before playing the message.

ANSM_USETONE 1

Wait for the beep, and then wait a little longer to ensure it was the last beep.

AREACODE_DIGITS

This keyword defines the number of digits in the area code where the TSP is installed. For the USA this would be set to “3.” For other countries, you should set it appropriately.

Page 6-6

Version 4.0

CPSEE_TSP500 User Guide

 

This document is confidential and proprietary to SER Solutions and is not for external use.

Page 120
Image 120
Avaya CPSEE_TSP500 manual Ansmusetone, Areacodedigits, Wait for a period of silence before playing the message