
Chapter 5 Admin Terminal Commands
| Table |
|
|
Bug Trace | Description |
|
|
Hook Status | Traces hook changes received from Digital Sta- |
| tions. It displays the Station Number and hook |
| state (On or OFF). |
|
|
DTI Events | Traces NMS Digital Trunk Monitoring Events. A |
| description of these events can be found in the |
| NMS Digital Trunk Monitor Service Developer’s |
| Reference Manual (P/N |
|
|
Alarm Events | Traces events, and actions associated with trunk |
| alarms on the TSP. |
|
|
DSP Events | Traces NMS DSP Events. A description of these |
| events can be found in the ADI Service Developer’s |
| Reference Manual (P/N |
| Messaging Service Developer’s Reference Manual |
| (P/N |
|
|
Conference Events | Traces events, and actions associated with Confer- |
| encing or Monitoring. |
|
|
Call Events | Traces events associated with NMS’s Natural Call |
| Control API. Natural Call Control is NMS’s generic |
| API used for |
| Interfaces. A description of these events can be |
| found in the NMS Natural Call Control Service |
| Developer’s Reference Manual (P/N |
|
|
Application Events | Provides additional tracing information typically |
| associated with NMS events. |
|
|
Lights | This option traces the Protocol B messages associ- |
| ated with the Light Display. (The light display is not |
| currently supported on the CPSEE_TSP500) |
|
|
CONNECTS | Traces the low level functions used for time slot |
| connection on the Telephony Buss. |
|
|
ACD | Traces the Interactive Voice Response (IVR) calls. |
|
|
CLOCK | Traces changes to the T1/E1 clock. |
|
|
CALL
Displays the ISDN parameters defined for the specified span
Note: | . |
Intended for engineering use |
|
only. | Syntax: call <span #> |
|
CAPTURE
Allows recording of raw audio signals for use in voice detection analysis.
Page | Version 4.0 | CPSEE_TSP500 User Guide |
| This document is confidential and proprietary to SER Solutions and is not for external use. |