Chapter 3 Starting/Configuring TSP500
Admin Terminal
Once the TSP is running, you can access the Admin Terminal (dumb termi- nal) by selecting the Admin_Terminal item in the menu. You can also access the Admin Terminal using the Linux login dumb1.
The Admin_Terminal selection from the TSP menu system has options to control the TSP. The following are some key pieces of information regarding the Admin_Terminal:
1.Customer Support can use the Admin_Terminal command stoptsp to shutdown the TSP application remotely. You can select Activate_TSP to to restart the TSP.
2.The Admin_Terminal command quit is used to disconnect the
Admin_Terminal from the TSP. You must then press Enter twice to fin- ish the disconnection process. You will return to the TSP Main Menu.
3.Immediately after starting the TSP application and entering into the Admin_Terminal, you will see “Enter Command.” After entering a com- mand, it may take one to two minutes for the full application to start before you receive a response from the terminal. This is normal.
4.See TSP500 Admin Terminal Commands in “Features and Enhance- ments” on page
Page | Version 4.0 | CPSEE_TSP500 User Guide |
| This document is confidential and proprietary to SER Solutions and is not for external use. | |
