
Chapter 8 TSPLogger
Configuration
The configuration file for controlling the TspLogger will be the file sys- log.cnf (located in the /opt/ser/cfg directory). The following describes the keywords used for configuring the TspLogger.
This file can be accessed via an item in the Configuration Menu on the TSP.
Example:
===============================================
TSP Configuration [tspdev10]
(c)Copyright
===============================================
A.... | DialingRules |
B.... | DnisConfiguration |
C.... | ISDNConfiguration |
D.... | Strategies |
E.... | SysLogConfiguration |
F.... | Tools |
G.... | Trunks |
H.... | WriteCfigToArchive |
Select Item:
The following describes the three configuration items used to configure the TspLogger. SYSLOG_HOST is the only required assignment. The other two are optional.
SYSLOG_HOST
IP address of the PC where the syslogger resides. This should be entered using dot notation.
Example:
SYSLOG_HOST 192.168.2.10
SYSLOG_PORT
This keyword is optional. The default port used for TspLogger is the industry standard port 514. If for some reason you need to use another port, this key- word can be used to assign it.
Example:
SYSLOG_PORT 9400
Page | Version 4.0 | CPSEE_TSP500 User Guide |
| This document is confidential and proprietary to SER Solutions and is not for external use. |