Avaya CPSEE_TSP500 manual Decibel Level Adjustment Feature

Chapter 4 Features and Enhancements

assigned.

•The Admin Terminal command “spstuff" displays “Monitor has Assigned Station List”, if a monitor has been restricted via the MONITOR_ASSIGN keyword.

Enter Command->		sp 169
Station # 169		Matrix: 0000082c
mvip:	board: 0	st: 9	ts: 20	<-- 7fff
local: board: 3		st:28	ts: 0	<-- 7fff
Dsp	1189 Assigned
Dsp is listening to MTX 82c

Queue = stinact

Digital Station (trunk=937)

Phone On Hook

This Station has Manual		Monitor Capability
Monitor has Assigned Station			List
sflags = [8100]	tflags	= [0]	zflags = [0]
preview queue:	current: 0		Peak: 0

Decibel Level Adjustment - Feature

When performing Client Monitoring, the audio level of the monitored call tends to be lower than that of the Client, and Supervisor. A new keyword has been added to the Dialing Rules (CLIMON_GAIN) that will specify some decibel level to increase the volume of the monitored call. The default gain at present is 6db. If customers are complaining of low volume when doing Cli- ent Monitoring, add this keyword and type “load all” in the Admin Terminal. The range of adjustment is 0db through 12db.

Example: CLIMON_GAIN 9

The above assignment would raise the volume of the monitored call by 9db.

Page 4-22Version 4.0CPSEE_TSP500 User Guide

This document is confidential and proprietary to SER Solutions and is not for external use.